200-301Lab

Nobody at Depot can reach the new Assembly server

about 20 min
Exit
10.62.4.0/2410.62.0.0/3010.62.11.0/24PC110.62.4.20R110.62.4.1R210.62.0.2SRV110.62.11.50
Depot on the left, the point to point link, and Assembly on the right.
Console

Start with enable, then configure terminal. Type a command, or use one below.

R1>

This is a simulated device. Output is computed from the topology, not from real hardware.

Assembly brought a records server online last night on 10.62.11.0/24, and the contractor left before finishing R2. Nobody at Depot can reach it. R1 and R2 can still see each other across the point to point link, so the two sites are not isolated.

Finish the Assembly link and give Depot a route to it, then save both routers.

Objectives

0 / 4

Checked against the configuration you build. Checking is free and unlimited.

  • At least six interfaces carry an IPv4 address and mask (not checked yet)

  • Every interface on R2 is administratively up (not checked yet)

  • PC1 can reach the records server at 10.62.11.50 (not checked yet)

  • Both routers have saved the running configuration (not checked yet)

Your configuration is kept in this browser, so you can come back to it. Start over clears it.

Nobody at Depot can reach the new Assembly server | CCNA lab | FirstTry