200-301Lab

Contractors may print, and nothing else

about 25 min
Exit
10.62.20.0/2410.62.60.0/2410.62.0.0/3010.62.50.0/2410.62.51.0/24STAFF10.62.20.10CTR10.62.60.15R110.62.0.1R210.62.0.2FILES10.62.50.10PRN10.62.51.20
Staff and contractors behind R1; the file server and the print server behind R2.upshutno address
user EXEC

Start with enable, then configure terminal. Type a command, or use one below.

This is a simulated device. Output is computed from the topology, not from real hardware.

The contractor network at 10.62.60.0/24 was brought up on R1 last week with no filtering. Contractors need the print server on 10.62.51.0/24 behind R2. They must not reach the file server on 10.62.50.0/24, which staff on 10.62.20.0/24 use all day. Nothing else on the site should change.

Stop the contractor network reaching the file server subnet, leave it the print server, and leave staff untouched. Save the router you change.

Objectives

0 / 4

Checked against the configuration you build. Checking is free and unlimited.

  • A contractor at 10.62.60.15 cannot reach the file server (not checked yet)

  • A contractor at 10.62.60.15 can still reach the print server (not checked yet)

  • Staff at 10.62.20.10 can still reach the file server (not checked yet)

  • The router you changed has saved the running configuration (not checked yet)

Your configuration is kept in this browser, so you can come back to it. Start over clears it.

Contractors may print, and nothing else | CCNA lab | FirstTry