200-301Lab

Sales moved and the route did not

about 20 min
Exit
10.62.20.0/2410.62.0.0/30G0/1G0/110.62.30.0/24PC110.62.20.10R110.62.0.1R210.62.0.2SALES110.62.30.40
The office on the left, the new Sales server behind R2 on the right.upshutno address
user EXEC

Start with enable, then configure terminal. Type a command, or use one below.

This is a simulated device. Output is computed from the topology, not from real hardware.

Sales moved from the old annex to the main building over the weekend, and its server subnet 10.62.30.0/24 now sits behind R2. R1 still carries the static route from before the move, pointing at the annex router that was switched off. R2 was installed clean and has no route back to the office subnet. From the office PC the Sales server is unreachable, and from the server the office is unreachable too.

Correct the route on R1, give R2 its return route, and save both routers.

Objectives

0 / 3

Checked against the configuration you build. Checking is free and unlimited.

  • PC1 at 10.62.20.10 can reach the Sales server at 10.62.30.40 (not checked yet)

  • The Sales server can reach PC1 at 10.62.20.10 (not checked yet)

  • Both routers have saved the running configuration (not checked yet)

Your configuration is kept in this browser, so you can come back to it. Start over clears it.

Sales moved and the route did not | CCNA lab | FirstTry