N10-009Lab

The new branch can see itself and nothing else

about 15 min
Exit
10.80.5.0/2410.80.0.0/30G0/1G0/110.80.10.0/24PC110.80.5.20R1branchR2head officeFS110.80.10.50
The branch on the left, the point to point link, head office on the right.upshutno address
user EXEC

Start with enable, then configure terminal. Type a command, or use one below.

This is a simulated device. Output is computed from the topology, not from real hardware.

A two-person branch opened this morning on 10.80.5.0/24 behind a small router, R1, with a point to point link to the head office router R2. The installer addressed both ends of the link and left. Branch users can reach each other and the local printer, and nothing at head office, where the file server sits on 10.80.10.0/24. Head office already has a route to the branch.

Give the branch router a way to head office and save it.

Objectives

0 / 2

Checked against the configuration you build. Checking is free and unlimited.

  • PC1 at 10.80.5.20 can reach the file server at 10.80.10.50 (not checked yet)

  • The branch router has saved the running configuration (not checked yet)

Your configuration is kept in this browser, so you can come back to it. Start over clears it.

The new branch can see itself and nothing else | Network+ lab | FirstTry