N10-009Lab

The cameras can reach the payroll server

about 25 min
Exit
10.80.20.0/2410.80.40.0/2410.80.0.0/3010.80.50.0/2410.80.60.0/24OFFICE10.80.20.10CAM10.80.40.25R110.80.0.1R210.80.0.2NVR10.80.50.5PAYROLL10.80.60.10
Office and cameras behind R1; the recorder and the payroll server behind R2.upshutno address
user EXEC

Start with enable, then configure terminal. Type a command, or use one below.

This is a simulated device. Output is computed from the topology, not from real hardware.

Forty IP cameras were installed on 10.80.40.0/24 behind R1, next to the office network on 10.80.20.0/24. Their recorder sits on 10.80.50.0/24 behind R2. An audit found that a camera can open a connection to the payroll server at 10.80.60.10, which also sits behind R2. Cameras need the recorder. Office staff need payroll. Nothing else should change.

Stop the camera network reaching the payroll subnet while leaving it the recorder, leave the office untouched, and save the router you change.

Objectives

0 / 4

Checked against the configuration you build. Checking is free and unlimited.

  • A camera at 10.80.40.25 cannot reach the payroll server (not checked yet)

  • A camera at 10.80.40.25 can still reach the recorder (not checked yet)

  • The office at 10.80.20.10 can still reach the payroll server (not checked yet)

  • The router you changed has saved the running configuration (not checked yet)

Your configuration is kept in this browser, so you can come back to it. Start over clears it.

The cameras can reach the payroll server | Network+ lab | FirstTry