N10-009Lab

The warehouse dropped off the network after the maintenance window

about 20 min
Exit
10.80.20.0/2410.80.1.0/30G0/1G0/210.80.30.0/24WH110.80.20.30R1warehouseR2coreERP10.80.30.40
The warehouse on the left, the core router R2 with the moved port, the ERP server on the right.upshutno address
user EXEC

Start with enable, then configure terminal. Type a command, or use one below.

This is a simulated device. Output is computed from the topology, not from real hardware.

During last night's maintenance window a technician moved the warehouse link on R2 to a different port and did not finish. This morning the ERP server at 10.80.30.40 cannot push orders to the warehouse scanners on 10.80.20.0/24, and the change record says the port was moved and nothing else. R1 at the warehouse is untouched and routes everything to R2.

Find what was left unfinished on R2, put it right, and save R2.

Objectives

0 / 3

Checked against the configuration you build. Checking is free and unlimited.

  • Every interface on R2 is administratively up (not checked yet)

  • The ERP server at 10.80.30.40 can reach the warehouse scanner at 10.80.20.30 (not checked yet)

  • R2 has saved the running configuration (not checked yet)

Your configuration is kept in this browser, so you can come back to it. Start over clears it.

The warehouse dropped off the network after the maintenance window | Network+ lab | FirstTry