FirstTry

Objective 3.7

220-1201

Given a scenario, deploy and configure multifunction devices/printers and settings.

Objective 3.7 sits in Hardware, which carries 25% of the A+ Core 1 exam. The questions below are original, written from the official objective title above, and each explanation cites the CompTIA page it rests on.

Objective title verbatim from the official objectives. CompTIA exam page ↗

A worked example

Shown solved, with the whole explanation open: this is what every question here carries.

3-7Hardware

A printer driver is described as having two main components: one that converts an application's graphics commands into printer data, and one that manages the user-facing settings and program interface. What are these two components called?

Print queue component and job control componentPrint queue and job control are spooler-level concepts, not driver components.
Spooler component and port driver componentThe spooler and port driver are separate print architecture pieces, not the two parts of a driver itself.
Rendering component and configuration componentCorrect · your answerCorrect: these are the two documented printer driver components.
EMF component and metafile componentEMF and metafile refer to the spool file format, not driver components.
GDI graphics engine and XPS conversion moduleGDI and XPS are print path technologies, not the driver's internal component names.

Correct.

Checked against learn.microsoft.com, July 2026

Concept

Printer driver architecture separates the job of converting graphics data from the job of exposing configurable options to users and applications.

Why C

The rendering component converts application graphics commands into printer-usable data, while the configuration component handles the UI and program interface for printer options, matching the described roles exactly.

Source

Printer drivers include a rendering component and a configuration component. The rendering component converts the graphics commands from the application into a data format that the printer uses to render the image on the page. The configuration component contains a user interface component that enables users to control a printer's selectable options and a program interface that communicates the printer's configuration and features to an application.

Microsoft Learn: Introduction to printing, checked July 2026
#printer driver#multifunction devices#print architecture

Now you: objective 3.7 questions

No account needed. The explanation opens when you answer.

Sample question 1 of 3

3-7Hardware

A technician wants a user to be able to open printer Properties and change duplex mode and paper tray selection through an on-screen interface. Which printer driver component provides this user interface?

Sample question 2 of 3

3-7Hardware

After a print job leaves the spooler, it must be delivered to the printer's physical connection. Which component receives the spooler's data stream and sends it out through the serial, parallel, or network I/O port?

Sample question 3 of 3

3-7Hardware

A WPF application spools a print job in XPS format to a print queue that uses a GDI-based, version 3 printer driver, not an XPSDrv driver. What happens to the spooled file before the printer renders it?

That’s 3 of the full A+ Core 1 bank.

Keep going free: 10 questions per certification in bank practice, with no account.

Continue practicing

Read the sources

These are the official pages the questions above cite. Reading them is studying the objective from the primary source, which is what the explanations point you toward anyway.

More objectives in Hardware